The most admissible dimensions and mass of autocargo transport. Reference book

1.1. Maximum length, m

truck.......................... 12,0
bus............................................. 12,0
trailer.............................................. 12,0
the jointed vehicle.... 20,0
the jointed bus......................... 18,0
road trains........................................... 20,0

1.2. Maximum width, m

all vehicles.................................. 2,55
isothermal bodies of vehicles.... 2,60

1.3. Maximum height, m........................... 4,0

2. The maximum sizes of vehicles specified in point 1 of the present Appendix include the sizes of demountable bodies and container for freights, including containers.

3. Any vehicle at the movement has to provide possibility of turn within the space limited with an external radius of 12,5 m and with an internal radius of 5,3 m.

4. The maximum distance between an axis of a lock of the coupling device and back part of the combined vehicle shouldn't exceed 12,0 m.

5. The maximum distance measured parallel to a longitudinal axis of the road train from an external forward point of a body or a platform for installation of freight behind a cabin to a back external point of the trailer, minus distance between back part of the tractor and forward part of the trailer, shouldn't exceed 17,0 m.

6. The maximum distance measured parallel to a longitudinal axis of the road train from an external forward point of a body or a platform for installation of freight behind a cabin to a back external point of the semi-trailer shouldn't exceed 16,4 m.

7. The freight established in a vehicle body shouldn't support a back external point of the car or trailer more than on 2,0 m.

8. The distance between a back axis of the truck and a forward axis of the trailer has to be not less than 3,0 m.

9. Horizontally measured distance between an axis of hinged fastening of the semi-trailer and any point of forward part of the semi-trailer shouldn't exceed 2,04 m.

10. Length of the vehicle has to be measured according to point 6.1 of the ISO 612-1978 standard. Thus at measurement of length the following devices mounted on the vehicle aren't considered:

    devices for purification of glasses and mudguards;
    frontal and side marking plates;
    devices for sealing and defensors for them;
    devices for fixing of tarpaulin and defensors for them;
    equipment for an electric lighting;
    mirrors of back visibility and the adaptation for the review of space behind the car;
    airwater tubes;
    lengths of valves and sockets for connection with trailers or demountable bodies;
    steps for access to a body, the elevator for a spare tire cover;
    lifting platforms, steps for access and other similar equipment which isn't exceeding 200 mm in working situation and executed so that it couldn't increase the limit lot of loading of the car established by the manufacturer.

  OUR SERVICES  
Order delivery (calculate delivery) Ask our managers and logistics specialists
  CONTACTS  
Republic of Belarus, Minsk 220021, Str. Odesskaya 20B - 119

+375(17)345-62-22

+375(44)751-09-09

vk fb

up